EL-HADAR ENGINEERING PLC — LOGO FILES
Issued by Spark Multimedia · 6 November 2026

------------------------------------------------------------------
WHAT IS IN HERE
------------------------------------------------------------------

01  ENGINEERING LOCKUP — HORIZONTAL          1433 x 420 px, PNG, transparent
    The primary lockup. Use this unless there is a reason not to.

    full-colour            On white and light backgrounds.
    reversed               On charcoal and dark photography. Keeps the
                           orange; descriptor in light grey.
    white                  Entirely white. For dark or busy photography
                           where the orange will not hold.
    mono                   Single graphite. Print one-colour, fax, stamps,
                           engraving, embroidery.
    full-colour-no-motto   Without "WE ARE COMMITTED TO SERVE YOU!".
                           Use below roughly 115 px wide, where the motto
                           stops being legible.
    mono-no-motto          As above, one colour.

02  ENGINEERING LOCKUP — VERTICAL            886 x 868 px
    For square and near-square spaces: social avatars, stamps, signage
    plates, the corner of a drawing sheet.

03  MARK ONLY                                809 x 808 px
    The circular monogram with no wordmark. Only where El-Hadar is already
    named in the immediate surroundings — app icons, favicons, a repeated
    element, a pattern.

    orange / graphite / white / original

04  WORDMARK WITHOUT DESCRIPTOR
    "EL-HADAR" with no "ENGINEERING" beneath. Under the earlier two-brand
    system this was the group-level lockup. See the note below before using
    it.

------------------------------------------------------------------
MINIMUM SIZES
------------------------------------------------------------------
Horizontal lockup, with motto        60 mm / 170 px wide
Horizontal lockup, without motto     40 mm / 115 px wide
Vertical lockup                      28 mm / 80 px wide
Mark only                            10 mm / 32 px wide

Below the "with motto" minimum, switch to a no-motto file. Do not scale a
motto version down and hope.

------------------------------------------------------------------
CLEAR SPACE
------------------------------------------------------------------
Keep clear space on all four sides equal to the height of the circular
mark. Nothing enters it — no type, no rules, no image edges, no other
logos.

------------------------------------------------------------------
COLOUR
------------------------------------------------------------------
Orange      #E08326      RGB 224 131 38
Graphite    #1F252B
Steel       #5A646E
Paper       #FFFFFF

------------------------------------------------------------------
DO NOT
------------------------------------------------------------------
Recolour it. Stretch or condense it. Rotate it. Add a shadow, glow, bevel
or outline. Rebuild the lockup by setting the type yourself. Place the
full-colour version on a dark background — use the reversed or white file.
Place any version on a busy photograph without a scrim behind it.

------------------------------------------------------------------
TWO THINGS TO KNOW
------------------------------------------------------------------
1. These are PNG only, at the sizes above. There is no vector master in
   the folder we hold. For large-format print, signage, vehicle livery or
   embroidery you will need the original AI, EPS or SVG from whoever drew
   the mark. Worth chasing before it is needed urgently.

2. The brand guideline in the folder (ElHadar_Brand_Guideline.pdf, v3.0,
   29 August 2026) is built on "two brands, one system" — El-Hadar Group
   and El-Hadar Engineering — and documents a group lockup. That position
   has since been retired: El-Hadar is a company, not a group, and the
   company profile and website documents were rewritten accordingly. The
   guideline has not yet been corrected. Until it is, treat the Engineering
   lockup in folder 01 as the primary mark and treat folder 04 as legacy.
